Free Newsletter
Register for our Free Newsletters
Analysis, Inspection and Laboratory
Assisted/Independent Living
Clinical and Nursing Equipment
Design and Manufacture of Medical Equipment
Diagnostics Equipment, Monitoring and Test
Education, Training and Professional Services
Health Education and Patient Management
Health Estates Management
Healthcare Support and Information Services
Hygiene and Infection Control
IT and Communications in Healthcare
Medical Device Technology
Research and Development
Safety and Security
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Health Zone
Pro Security Zone
Web Lec
Pro Engineering Zone

Ergonomic pipetting system complies with ISO 8655

Biohit : 12 June, 2007  (New Product)
The Ergo-Mate introduced by Biohit is an ergonomic pipetting system designed to aid in compliance with ISO 8655.
ISO 8655 recommends when pipetting to touch off samples on the wall of the receiving vessels especially with small volumes.

The Ergo-Mate ergonomic pipetting system removes the need to hold the plate at any angle and allows for safe dispensing.

The results are that pipetting is easier, safer and more precise with the angled Ergo-Mate.

When reversed, the Ergo-Mate creates an ideal aerosol barrier for use in hoods or on bench top surfaces.
The pipetting system is ideal for safe transporting of plates and can be reversed for and used for flat surface pipetting or as an incubation station with a lid.

In addition to the Ergo-Mate, Biohit is the leading manufacturer of ergonomically designed multichannel pipettors.

The mLINE Series is the lightest mechanical pipettor incorporating low ejection and pipetting forces with the accuracy/precision expected from an IVD manufacturer.

The mLINE ensures pipetting always starts with constant force regardless of the volume.

Biohit's eLINE is the only electronic multichannel pipettor with electronic tip ejection.

The Biohit eLINE pipettors are available in single-channel models covering the volume range from 0.2 to 5000ul and in 8- and 12-channel models from 0.2 to 1200ul.

The lower parts of the eLINE pipettors are autoclavable (excluding the multichannel 50-1200ul pipettors).

Both mLINE and eLINE series are designed under IVD/CE manufacturing standards.

Bookmark and Share
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
   © 2012
Netgains Logo