Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Analysis, Inspection and Laboratory
LeftNav
Assisted/Independent Living
LeftNav
Clinical and Nursing Equipment
LeftNav
Design and Manufacture of Medical Equipment
LeftNav
Diagnostics Equipment, Monitoring and Test
LeftNav
Education, Training and Professional Services
LeftNav
Health Education and Patient Management
LeftNav
Health Estates Management
LeftNav
Healthcare Support and Information Services
LeftNav
Hygiene and Infection Control
LeftNav
IT and Communications in Healthcare
LeftNav
Materials
LeftNav
Medical Device Technology
LeftNav
Research and Development
LeftNav
Safety and Security
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Health Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
News

Exos develops innovative casting, splinting and bracing technology

Enova Medical Technologies : 31 August, 2007  (New Product)
Enova Medical Technologies and Product Innovations (PI) have launched Exos, a joint venture company that will develop and commercialise innovative orthopaedic support devices.
Exos will focus on the product development and commercialisation surrounding its evolutionary, patent-pending technology called OrthoFoam Dry-Heat Thermoformable Splint/Cast/Brace Systems.

Taking a composite materials approach to the construction and custom fitting of orthopaedic devices, OrthoFoam technology is expected to change the practices surrounding external orthopaedic casting, splinting and bracing.

“There is considerable market opportunity for this technology, ranging from emergency room splinting to long-term bracing during patient rehabilitation. Our immediate focus is to manufacture and launch our initial OrthoFoam products for upper extremity injuries,” said Fariborz Boor Boor, Enova CEO and Exos president/CEO. “Over the next year, we will release additional products for lower extremity injuries and longer-term bracing needs through a variety of clinical venues.”

Roger Heegaard, Enova president/COO and Exos board member, explained that Exos delivers on Enova’s commitment to bringing life-changing technologies to market. “This venture perfectly illustrates Enova’s strategy of fostering a collaborative community of medical professionals that discovers new ideas and quickly turns them into innovative healthcare products,” he said. “Exos is the direct result of combining PI’s tremendous creative and design capabilities with Enova’s skill in bringing revolutionary medical technology ideas to life.”

Mark Joseph, PI president, developer of the OrthoFoam technology, and Exos board member, is excited to be teaming with Enova. He said: “Together we are turning a good idea into a reality in the marketplace. Exos is our common vision to make a serious difference in a field that we believe is long overdue for new technology. Casting has seen little improvement over the past twenty five years when compared with other medical fields and we intend to raise it to a new level.”

Patents are pending on the OrthoFoam technology. Exos bracing, splinting and casting products will be considered Class I medical devices according to FDA regulations. The first product launch is expected in early 2008.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 ProHealthServiceZone.com
Netgains Logo