Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Analysis, Inspection and Laboratory
LeftNav
Assisted/Independent Living
LeftNav
Clinical and Nursing Equipment
LeftNav
Design and Manufacture of Medical Equipment
LeftNav
Diagnostics Equipment, Monitoring and Test
LeftNav
Education, Training and Professional Services
LeftNav
Health Education and Patient Management
LeftNav
Health Estates Management
LeftNav
Healthcare Support and Information Services
LeftNav
Hygiene and Infection Control
LeftNav
IT and Communications in Healthcare
LeftNav
Materials
LeftNav
Medical Device Technology
LeftNav
Research and Development
LeftNav
Safety and Security
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Health Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
News

Medtronic’s new bifurcation stent is used for the first time in humans

Medtronic : 28 February, 2008  (New Product)
Medtronic has announced the first human use of the company’s new investigational bifurcation stent, which employs an innovative Y-shaped design to match the anatomy of lesions that form at the junctions of coronary arteries.
Dr Robert Whitbourn, associate professor and director of the Cardiovascular Research Centre at St Vincent’s Hospital in Melbourne, performed the first clinical Implant of the new device on February 25, 2008 as an investigator in the trial, dubbed the BRANCH study.

“I left the first case very encouraged by the overall performance of the Medtronic bifurcation stent,” reported Dr Whitbourn, who also serves as director of the Cardiac Catheterisation Lab and Coronary Intervention at St Vincent’s. “I was especially impressed with its deliverability and believe it has the potential to treat the majority of true bifurcation lesions across the coronary vasculature. Traditional bifurcation techniques require re-crossing of deployed Stent struts, overlapping metal, or the potential risk of incomplete coverage of the bifurcation. This device provides a logical solution for addressing these procedural and technical limitations.”

The BRANCH study is designed to assess the safety and deliverability of the Medtronic bifurcation stent, which differs from other approaches by providing scaffolding to both branches of the bifurcation simultaneously without overlapping stents. The prospective, single-arm trial will enroll up to 60 patients at five sites in Australia and New Zealand. Enrollment is expected to be complete by the end of 2008.

Primary endpoints include cardiac death, myocardial infarction involving the target vessel, and clinically-driven target vessel revascularization (TVR) 30 days post-implant. Other endpoints include device, lesion and procedure success. Expected to be available early in 2009, results from the study will determine whether Medtronic will launch development of a drug-eluting version of the bifurcation stent.

The BRANCH study’s principal investigator is Ian Meredith, professor of cardiology at Monash Medical Centre in Melbourne. “Medtronic’s bifurcation Stent provides single-layer, uniform coverage of both the main and side branch,” Meredith explained. “This key feature of the Y-shaped design differentiates it from the current dedicated bifurcation concepts. I am impressed with the flexibility and encouragingly low crossing profile of the Stent relative to its design, and believe this new device holds great promise for the treatment of patients with bifurcation lesions, which remain an unsolved clinical challenge in interventional cardiology.”

Of the approximately two million percutaneous coronary interventions (PCIs) performed each year worldwide, an estimated 450,000 (20 percent to 25 percent) involve patients with bifurcation lesions, which are consistently recognized as one of the most difficult lesion types to treat. In addition, PCIs for bifurcation lesions are associated with higher adverse event rates than standard PCIs.

The Medtronic bifurcation Stent is intended to reduce the procedural challenges associated with current two-stent bifurcation techniques, which generally require the use of two overlapping stents one for the main branch, the other for the side branch.

Delivered over a dual-wire delivery system through a single catheter, the new Stent leverages the latest Medtronic balloon-tapering and -folding technology to minimise the delivery system’s profile. Like other members of Medtronic’s Stent portfolio, it is made of an advanced cobalt alloy, which enables the Stent struts to be extremely thin while also providing sufficient strength to scaffold the artery.

In addition, the investigational bifurcation Stent features the same modular architecture and custom fusion laser pattern, which have shown deliverability, flexibility and conformability in Medtronic’s commercially available stents (the Driver bare-metal Stent and the Endeavor drug-eluting Stent internationally, including the USA; and the Endeavor Resolute drug-eluting Stent outside the USA).

“The innovative design of our bifurcation Stent reflects the input of numerous leading physicians on prototype development and preclinical study, as well as feedback from hundreds of other cardiologists around the world,” said Sean Salmon, vice president and general manager of the Coronary and Peripheral Vascular business at Medtronic. “With the start of the BRANCH study, we look forward to continuing our record of innovation through collaboration for the benefit of patients with cardiovascular disease.”
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 ProHealthServiceZone.com
Netgains Logo