Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Analysis, Inspection and Laboratory
LeftNav
Assisted/Independent Living
LeftNav
Clinical and Nursing Equipment
LeftNav
Design and Manufacture of Medical Equipment
LeftNav
Diagnostics Equipment, Monitoring and Test
LeftNav
Education, Training and Professional Services
LeftNav
Health Education and Patient Management
LeftNav
Health Estates Management
LeftNav
Healthcare Support and Information Services
LeftNav
Hygiene and Infection Control
LeftNav
IT and Communications in Healthcare
LeftNav
Materials
LeftNav
Medical Device Technology
LeftNav
Research and Development
LeftNav
Safety and Security
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Health Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
News

New pipettor range is designed to minimise fatigue

Bel-Art Products : 01 April, 2008  (New Product)
The new Ergopet Pipettors range is designed to allow adjustments for maximum comfort as well as minimal arm strain and fatigue when working inside a hood or on the bench.
Models are available in a range of sizes and allow users of varying body heights to lower their hand position and to rest their elbows on the bench. This position supports the arm and pipettor, especially under the hood sash.

The swiveling head of the Ergopet Pipettor can be positioned straight ahead in-line with the hand or rotated up to 90 degrees left or right, permitting an unobstructed view of the meniscus and graduations and minimising wrist strain.

A soft silicone chuck accepts glass or plastic pipettes and rotates to change the pipette angle from vertical to 15 degrees outward. The hydrophobic filter within the chuck protects the pipettor from inadvertent backflow and can be easily replaced without tools. A comfortable grip and light weight make all the Ergopet Pipettors feel balanced in the hand, and provide comfortable strain-free operation.

The Ergopet Pipettors are available in four different powered models and 14 sizes to meet the needs of any laboratory setting.

The portable Ergopet Battery Powered Pipettor runs on two rechargeable 1.2V AA NiMH batteries that can be recharged approximately 500 times with the supplied wall charger. The Ergopet Battery Powered Pipettor provides the freedom of mobility and the convenience of individual push buttons to easily control aspirating and dispensing and dispensing speeds from slow (gravity) to fast (powered).

The Ergopet Battery Powered Pipettors are available in 7.5 inch, 11.5 inch, 15.5 inch and 19.5 inch in height and weighs 10.1oz, 11.4oz, 12.8oz and 14.1oz respectively.

The state-of-the-art Ergopet Memory Pipettor aspirates and dispenses a precise amount of liquid repeatedly in the ‘memory mode’ without using the graduations of the pipette. This unique feature decreases the repetitive use of the fingers during pipetting, greatly reducing muscle fatigue and repetitive stress injuries.

Operating on two rechargeable 1.2V AA NiMH batteries (included), the Ergopet Memory Pipettor easily controls aspirating and dispensing with separate fingertip controls and adjustable speed dials. The Ergopet Memory Pipettors are available in 7.5 inch, 11.5 inch, 15.5 inch and 19.5 inch in height and weighs 11.1oz, 12.4oz, 13.7oz and 15.1oz respectively.

The Ergopet Air-Powered Pipettor uses a 120V AC air pump (included) to provide continuous operation without the need for battery charging. Individual push buttons easily control aspirating and dispensing from slow to fast. The Ergopet Air-Powered Pipettors are available in 7.75 inch, 11.75 inch and 15.75 inch in height and weighs 6.1oz, 7.4oz and 8.8oz respectively.

The Ergopet Bellows Pipettor operates silently without batteries, cords or tubing, and provides suction for over 100ml of volume. Individual push buttons easily control aspirating and dispensing and allow control of dispensing speed from slow to fast. The Ergopet Bellows Pipettors are available in 11 inch, 15 inch and 19 inch in height and weighs 7.1oz, 8.4oz and 9.8oz respectively.

For storage and as a convenient place to set the pipettors while working, the Ergopet Pipettor Wire Support Stand fits Ergopet I-III Pipettors and is made from rigid wire with a blue epoxy finish. This stand holds Ergopet Pipettors in a vertical position and for additional stability a Vikem vinyl coated lead ring can be added to the base of the stand.

There is also a rugged blue ABS Ergopet Pipettor Weighted Base available that stabilises the Ergopet Memory and Battery Powered Pipettors so they stand upright on a flat surface with ease. The weighted base can be used with the Battery-Powered and Memory Pipettors only.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 ProHealthServiceZone.com
Netgains Logo