Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Analysis, Inspection and Laboratory
LeftNav
Assisted/Independent Living
LeftNav
Clinical and Nursing Equipment
LeftNav
Design and Manufacture of Medical Equipment
LeftNav
Diagnostics Equipment, Monitoring and Test
LeftNav
Education, Training and Professional Services
LeftNav
Health Education and Patient Management
LeftNav
Health Estates Management
LeftNav
Healthcare Support and Information Services
LeftNav
Hygiene and Infection Control
LeftNav
IT and Communications in Healthcare
LeftNav
Materials
LeftNav
Medical Device Technology
LeftNav
Research and Development
LeftNav
Safety and Security
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Health Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
News

Zwick offers hip endoprostheses manufacturers new testing solutions

Zwick Roell : 28 January, 2008  (New Product)
Zwick is offering artificial hip manufacturers a choice of solutions for the dynamic and static in-vitro testing of hip endoprostheses and their components for use both in research and production environments.
The human hip has to carry about 2.5 times the body weight of most full-grown humans for many decades. The hip joint has been optimised by nature for such a permanent stress with about 160 million cycles of alter­nating load. These forces and strains consist of the body weight and the stabilizing muscles. Arthritis, obesity, osteoporosis, as well as extreme sport activities can have considerably negative consequences for this high-performance design.

The manufacturers of joint endoprostheses know that the choice of the right system for a patient is influenced by many factors, such as the extent of the disease, age, gender, osseous substance, and material tolerance. Nowadays, manufacturers offer various prostheses with different methods of fixation as well as geometries, and made from diverse materials.

The EU maintains control over the variety of joint endoprostheses through directives and standards. The standard regulations and guidelines contain a section for mechanical quality control. Components and total systems are tested for static and dynamic fatigue in order to warrant the product safety and quality over the life of the prostheses.

Due to the current reclassification of hip endoprostheses according to the EU directive 94/42/EEC from Class 2b to Class 3, European manufacturers are required to subsequently submit those test results for joint prostheses already in use to the notified bodies. The compliance to the higher requirements of Class 3 needs to be demonstrated in order to maintain the CE certification for older endoprostheses.

Testing is also necessary to verify the parameters of newly developed endoprostheses. The parameters and characteristics of the new geometries and materials must be known before the endoprostheses can be implanted in-vivo.

Zwick offers manufacturers a choice of solutions for the dynamic and static in-vitro testing of hip endoprostheses. Apart from testing systems for various static applications, the servo hydraulic Zwick HC 10 testing machine has been designed and continuously developed for the dynamic endurance test according to ISO 7206.

The dynamic stress at the shaft of the prosthetic hip joint during walk­ing is simulated with the Zwick HC 10. Through axial alternating loads on the shaft of the prosthetic hip joint, the endurance of the shaft over its lifetime of about 10 years is being tested. A simulation with 10 million cycles reflects an average stress on the prosthesis of about 1 to 2 million steps per year with a maximum of 2.3 kN (about 230 kg) over a total period of five years.

The standard specifies that the test be performed with a maximum frequency of 30 Hz. The test cylinder itself is designed with frequencies of up to 100 Hz, which can be set according to further applications.

Laboratories are often limited in space and require minimum noise levels. Zwick has integrated the low noise hydrau­lic power pack, with a sound level less than 60 dBA, into the base of the testing machine.

As a result customers save space and additionally, the user can place the machine directly next to the work­place without requiring any additional noise control.

Another new feature is the differential bearing that is mounted directly onto the testing actuator. The lateral differential bearing compensates the lateral movements between the femoral ball and the acetabular cup of the hip joint during gait simulation. This ensures the correct physiological position of the femoral stem to the acetabular cup and also the precise axial measurement without any shear force distortion.

In order to further accommodate the physiological conditions of a hip joint, Zwick offers an additional torsion axis for the test according to ISO 7206-08. The additional testing actuator enables superimposed compression and torsion stress on the hip joint allowing different movement sequences and stress scenarios of the hip joint to be simulated.

Zwick also provides an ambient bath with a temperature unit for the in-vivo simulation, so that users can carry out tests in a saline solution at about 37 degrees C according to typical physiological conditions.

The software testXpert II for the dynamic testing with the HC10 has also been developed specifically according to the customer requirements and now offers a powerful user administration system.

Every user logs into the system similarly to the Microsoft user administration and then various options are shown according to the pre-defined profiles, which have been set up by the system administrator.

Changes to the software settings before, during, or after the test are documented and archived tamper-proof rendering the test data.

All parameters concerning ‘who-when-what-why’ are saved and the processes are documented according to FDA 21 CFR Part 11 in the most secure and traceable way.
Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   Â© 2012 ProHealthServiceZone.com
Netgains Logo