Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Analysis, Inspection and Laboratory
LeftNav
Assisted/Independent Living
LeftNav
Clinical and Nursing Equipment
LeftNav
Design and Manufacture of Medical Equipment
LeftNav
Diagnostics Equipment, Monitoring and Test
LeftNav
Education, Training and Professional Services
LeftNav
Health Education and Patient Management
LeftNav
Health Estates Management
LeftNav
Healthcare Support and Information Services
LeftNav
Hygiene and Infection Control
LeftNav
IT and Communications in Healthcare
LeftNav
Materials
LeftNav
Medical Device Technology
LeftNav
Research and Development
LeftNav
Safety and Security
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Health Zone
Pro Security Zone
Web Lec
Pro Engineering Zone
 
 
Product design and development
Single axis positioning system plays enabling role for biomedical equipment
Product design and development : 29 December, 2014
LG Motion has just completed the supply of a customised positioning system for the bioengineering innovator MICA BioSystems.
 
Award-winning needle safety device protect healthcare workers from needlestick injuries
Product design and development : 29 December, 2014
Design consultancy Cambridge Design Partnership has developed RauSafe, an award winning needle safety device to protect healthcare workers from needlestick injuries. Both the USA Needlestick Act (2000) and the EU Needle Safety Directive (2010) came into force to help prevent sharps injuries in hospitals but many existing prefilled glass syringes on the market did not meet these needle safety regulations. The RauSafe can be retro-fitted to existing syringes to avoid the necessity for the long and expensive process of revalidation.
 
Design consultancy meets international standard for medical device quality
Product design and development : 26 October, 2014
Following a six-month accreditation review, Cambridge Design Partnership has been awarded ISO13485 and ISO9001 certification for quality management. These qualifications include strict healthcare regulations helping to ensure product safety and efficacy within the medical sector. The company was able to go through the accreditation process rapidly to achieve certification in just six months.
 
Multi-pedal footswitch/joystick selected for ophthalmic surgery microscope
Product design and development : 21 September, 2014
As an important part of its switching and sensing products range, Herga Technology designs and supplies hand and foot controls for medical equipment applications. One such application example is the 8-way footswitch/joystick controller supplied to the global medical and optical equipment manufacturer, Leica Microsystems, as an innovative option for its M220 F12 routine ophthalmic surgery microscope.
 
Kimball Electronics China facility achieves ISO 13485 certification for medical device manufacturing
Product design and development : 30 July, 2013
Kimball Electronics Group, a subsidiary of Kimball International, announces that the company’s production facility in Nanjing, China has achieved the ISO 13485 certification for medical device manufacturing.
 
Minnetronix acquires Neurofluidics to boost neurocritical care
Product design and development : 11 July, 2013
Minnetronix, Inc., a leading medical device design, manufacturing and IP innovations firm, is acquiring Neurofluidics, a privately-held company with an established base of patented technology in neurocritical care.
 
Oxygen concentrator shows potential to help reduce child mortality rates in developing world
Product design and development : 18 March, 2013
Design and technology consultancy Cambridge Design Partnership, in conjunction with the University of Cambridge Judge Business School, has identified that the company's award winning Oxygen Concentrator, originally designed for the military, might be repurposed to bring benefit to resource constrained countries, with the potential to help address child mortality rates around the world.
 
New generation of flexible surgical tools aims to carve out a new surgical landscape
Product design and development : 16 January, 2013
A new report from product development company, Cambridge Consultants predicts that the next wave of technologies has the potential to radically reshape the surgical landscape beyond 2030.
 
Manufacturing Institute’s Fab Lab helps TrusTECH prototype new opthalmic device
Product design and development : 09 March, 2011
The Manufacturing Institute’s Fab Lab hi-tech fabrication facility, where anyone with an idea can make almost anything they want, is helping TrusTECH, which is part of the NHS Innovation Hub network, to bring a new product for use in cataract surgery from prototype stage to market.
 
Plextek enhances image processing suite for medical device manufacturers
Product design and development : 24 November, 2010
Plextek, the Cambridge-based electronics and communications design consultancy, is enhancing the company’s image processing suite designed to help medical device manufacturers overcome the technical challenges involved in developing mega-pixel video solutions for medical applications.
 
Welch Allyn selects Singapore facility to develop digital connected products
Product design and development : 22 January, 2010
Welch Allyn plans to design next generation digital connected products specifically for Asian and emerging markets at its new international research and development facility in Singapore.
 
Biocoat installs new coating equipment to boost production capabilities
Product design and development : 19 January, 2010
Biocoat, the maker of lubricious HYDAK hydrophilic coatings, has completed installation of a new automated dip coating apparatus that allows increased coatings development capacity.
 
Increased facilities at TDC Medical
Product design and development : 04 September, 2009
Medical equipment design and manufacturing company expands its development labs and clean room facilities in Marlborough and Sunnyvale
 
TearLab Osmolarity System receives Medical Design Excellence Award
Product design and development : 18 May, 2009
Invetech announces that the TearLab Osmolarity System has been recognised for its innovative design with a Medical Design Excellence Award (MDEA).
 
St Jude Medical renews engineering services contract with Balan Biomedical
Product design and development : 19 December, 2008
St Jude Medical has renewed its contract for a range of engineering services from Balan Biomedical.
 
Cambridge Consultants licenses Dry Powder Inhaler technology to 3M Drug Delivery Systems
Product design and development : 11 December, 2008
Cambridge Consultants has agreed to license its Conix Dry Powder Inhaler (DPI) technology platform to 3M Drug Delivery Systems.
 
Realtime Technologies unveils wearable health sensor research platform
Product design and development : 17 July, 2008
Ireland-based Realtime Technologies has launched SHIMMER, a hardware research platform designed for wearable health sensing in both connected and wireless environments.
 
Dyadem supports DiaSorin to improve risk assessment of its medical devices
Product design and development : 13 May, 2008
DiaSorin has selected Dyadem to improve its risk assessment and ensure the quality of its medical devices by using Dyadem’s FMEA-Med software to improve its risk assessment processes and ensure regulatory compliance.
 
Cambridge Consultants aims to develop new test system for respiratory drug delivery devices
Product design and development : 12 May, 2008
Cambridge Consultants is developing a low-cost, portable instrument that has the potential to revolutionise the way certain drug delivery devices are tested.
 
Vena platform demonstrates medical device interoperability
Product design and development : 25 March, 2008
Cambridge Consultants has unveiled the first demonstration of the emerging industry standards for medical device interoperability.
 
Cambridge Consultants validates Bioheart Korea’s admission to UK AIM market
Product design and development : 13 March, 2008
Cambridge Consultants has validated the work of a Bioheart Korea (BHK), which is a company pioneering cell therapy with the potential to revolutionise the treatment of heart failure and has become Korea’s first company to successfully be admitted to the UK AIM market.
 
Beaumont Technology Usability Center continues to help FDA implement tubing misconnection safety study
Product design and development : 04 February, 2008
The Beaumont Technology Usability Center will begin research on the next phase of the US Food and Drug Administration's study on tubing and catheter misconnection errors.
 
Cambridge Consultants produce design specification document for single-use injection devices
Product design and development : 29 January, 2008
Cambridge Consultants has published a comprehensive set of technology, regulatory, design, standards and patient-usability guidelines for developing single-use injection devices that are capable of reconstituting a lyophilized drug.
 
Cambridge Consultants accelerates US expansion plans
Product design and development : 11 June, 2007
Cambridge Consultants, the product design and technology consultancy founded in Cambridge, UK, has announced that its CEO Brian Moon has relocated to the company’s US offices.
 
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 ProHealthServiceZone.com
Netgains Logo